Atlas 1010 Craftsman Drill Press Slow Speed Kit 2.000"

Description

I have run out of a critical part. This is my only way to pause the listing.  Check back late April.  Will reset price as soon as I possibly can.
THIS IS NOT AN ENTIRE DRILL PRESS. IT IS A SLOW SPEED INTERMEDIATE PULLEY AND ADAPER ONLY.  Drill press shown to illustrate fit and function.  No belts included.
Slow speed drive system for ATLAS 1010 and other 4 groove - 4L size belt 2" id
column
drill presses.  Shown on a Walker Turner 900 drill press in first photo (NO DRILL PRESS INCLUDED).  Reduces RPM at chuck.  Slower cutting speeds work better for metals.  Larger diameter cutters such as hole saws, paddle and Forstner bits cut better with less heat when turned at proper speeds.  Small diameter bits require higher speeds.  This pulley while capable of cutting your final output speed in 1/2 is also capable of doubling it making bits under 1/8" must less fragile.    Add about 0 value to your vintage American iron.
1) Your machine MUST have a column with 2.000"~ bore (range .032" under or over).  (example measurement of different drill press shown in photo, caliper upside down).   If you need a different size, please contact me. I have eBay listings for many sizes.
2) The column must be capable of protruding through the top of the head casting. (See caliper photo.)
3) Made for 4 groove pulley system requiring 1/2" belts or 4L belts. (Converts your 4 speed into a 12 speed with both slower and faster speeds.)
4) Flipping the motor drive pulley over is required.  All of them I have seen can be flipped without machining.  I have not seen yours.
5) Adjusting the head height on the column is required to line up belts.
6) Your belt guard (if so equipped) bottom or base plate must not cover the drill press column. If it does, a hole must be cut approximately 2.25" in diameter to reveal the tube opening.
This item includes:
Metal pulley loaded with ball bearings, pivot yoke, bronze pivot bushing and additive manufacturing column adapter machined to accept a bronze bushing.  This item is made by me including sourced and modified parts.  The drill press, belts and my hand are props used to show application of slow speed update kit and not included.
Don't buy this hoping it will fit.
MEASURE THE BORE of your column.  If your bore is different, please send me a photos of your drill press, caliper measurements and model of drill press.  I just might make a special one for you.
Following information is not warranted.  Provided as a record of my experience with my machines and sourced information.
MEASURE BEFOR BUYING.
It is up to you to MEASURE YOUR TUBE ID.  This item fits 2.000" tube ID.  Let me know if you need something different.
This is a slow speed accessory only, not an entire drill press.  A sample drill press is shown to illustrate fit and function of device and NOT INCLUDED.  You must have your OWN drill press.